Secure coating-to-substrate interface
The substrate chemistry and microstructure promote dense diamond nucleation, reducing the risk of premature coating separation in abrasive graphite cutting.
2DEM · Standard order code with online price
D6*18FL*60 OAL*6SH*2F
2F Diamond Square End · Order code: 2DEM 060 180 S06
D6*18FL*60 OAL*6SH*2F diamond-coated square end graphite end mill in the 2DEM series. Online reference price USD 22.60/pc as of 2026-Sep-14; order code 2DEM 060 180 S06.
Price available online
$22.60
USD / pc · FOB China
Price as of 2026-Sep-14
Published online for purchasing budgets and size comparison
Standard terms are 100% T/T in advance with a reference lead time of 10–15 working days. Final price and delivery are confirmed against quantity, tolerance, and order requirements.
- Order code
- 2DEM 060 180 S06
- Product family
- 2DEM
- Substrate / coating
- Solid carbide / diamond
- Quality documentation
- Dimensional report available
D6*18FL*60 OAL*6SH*2F engineering specification
Technical dimensions table
Order code: 2DEM 060 180 S06
All linear dimensions in mm
| Parameter | Symbol | Value | Purchasing / inspection note |
|---|---|---|---|
| Cutter diameter | D | 6 mm | Nominal cutting diameter; default tolerance -0.020 / 0 mm |
| Ball / corner radius | R | — | Not applicable to this specification |
| Flute length | L1 | 18 mm | Cutting edge length |
| Neck diameter | dN | — | Neck diameter not specified for this item |
| Neck length | L2 | — | Neck length not specified for this item |
| Shank diameter | d | 6 mm | Nominal shank diameter |
| Overall length | L | 60 mm | Overall length (OAL) |
| Flute count | Z | 2 | Number of flutes |
Inspection basis: Default cutter diameter tolerance -0.020 / 0 mm; default corner-radius tolerance ±0.02 mm. State special tolerances and dimensional-report requirements on the purchase order.
Diamond coating and edge retention
A diamond system engineered for graphite, 10x longer life
D6*18FL*60 OAL*6SH*2F combines a fine-grain carbide substrate with a graphite-specific diamond coating. On this square end tool, lower edge wear helps retain the specified dimensions and cutting profile during production.
About 74% less edge retreat after 60 minutes
In the shown carbon-resin test, diamond coating records about 0.006 mm edge retreat versus about 0.023 mm for TiAlN. Lower wear supports more consistent machined dimensions.
AK06 fine-grain carbide substrate
AK06 uses high-quality fine WC powder with controlled grain size and morphology, providing a diamond-compatible substrate for D6*18FL*60 OAL*6SH*2F.
ZOLLER dimensional inspection
Verified dimensions on every end mill
D6*18FL*60 OAL*6SH*2F
Every tool is checked for critical dimensions and cutting geometry using an optical measurement system. A dimensional report for order code 2DEM 060 180 S06 is available for incoming inspection and traceability.
- Nominal cutter diameter: 6 mm; default tolerance -0.020 / 0 mm
- Dimensional report available
Starting parameters for graphite
Cutting data for D6*18FL*60 OAL*6SH*2F
Use these values as the initial setup for diamond-coated solid carbide end milling in graphite. Validate by test cut and optimise for machine rigidity, tool overhang, runout, and dust extraction.
Spindle speed
11,000
rev/min
Feed rate
1,500
mm/min
Axial depth ap
9
mm
Radial width ae
0.6
mm
- Reference diameter
- Ø6 mm
- Flutes
- 2
- Effective length
- —
- Taper angle
- —
- Vc
- 207.3 m/min
- fz
- 0.0682 mm/tooth
Nearby 2DEM standard sizes
Compare dimensions and online prices
D6*25FL*110 OAL*6SH*2F
$29.40Order code: 2DEM 060 250 110
Ø6 · 2F · OAL 110 mm
D6*25FL*150 OAL*6SH*2F
$36.40Order code: 2DEM 060 250 150
Ø6 · 2F · OAL 150 mm
D5*15FL*60 OAL*6SH*2F
$20.80Order code: 2DEM 050 150 S06
Ø5 · 2F · OAL 60 mm
D5*20FL*110 OAL*6SH*2F
$27.80Order code: 2DEM 050 200 S06
Ø5 · 2F · OAL 110 mm
D4*12FL*50 OAL*6SH*2F
$18.00Order code: 2DEM 040 120 S06
Ø4 · 2F · OAL 50 mm
D8*24FL*70 OAL*8SH*2F
$33.60Order code: 2DEM 080 240 S08
Ø8 · 2F · OAL 70 mm
Request pricing: D6*18FL*60 OAL*6SH*2F
Send the order quantity, work material, machine setup, and target delivery. We will confirm order pricing, production scheduling, and dimensional-report requirements using the 2026-Sep-14 online reference price as the starting point; order code 2DEM 060 180 S06.
Send RFQ