Secure coating-to-substrate interface
The substrate chemistry and microstructure promote dense diamond nucleation, reducing the risk of premature coating separation in abrasive graphite cutting.
2GEM · Standard order code with online price
D2*10FL*20NL*60 OAL*6SH*2F
2F Long Shank Square End · Order code: 2GEM 020 200 S06
D2*10FL*20NL*60 OAL*6SH*2F diamond-coated square end graphite end mill in the 2GEM series. Online reference price USD 19.20/pc as of 2026-Sep-14; order code 2GEM 020 200 S06.
Price available online
$19.20
USD / pc · FOB China
Price as of 2026-Sep-14
Published online for purchasing budgets and size comparison
Standard terms are 100% T/T in advance with a reference lead time of 10–15 working days. Final price and delivery are confirmed against quantity, tolerance, and order requirements.
- Order code
- 2GEM 020 200 S06
- Product family
- 2GEM
- Substrate / coating
- Solid carbide / diamond
- Quality documentation
- Dimensional report available
D2*10FL*20NL*60 OAL*6SH*2F engineering specification
Technical dimensions table
Order code: 2GEM 020 200 S06
All linear dimensions in mm
| Parameter | Symbol | Value | Purchasing / inspection note |
|---|---|---|---|
| Cutter diameter | D | 2 mm | Nominal cutting diameter; default tolerance -0.020 / 0 mm |
| Ball / corner radius | R | — | Not applicable to this specification |
| Flute length | L1 | 10 mm | Cutting edge length |
| Neck diameter | dN | — | Neck diameter not specified for this item |
| Neck length | L2 | 20 mm | Nominal neck length |
| Shank diameter | d | 6 mm | Nominal shank diameter |
| Overall length | L | 60 mm | Overall length (OAL) |
| Flute count | Z | 2 | Number of flutes |
Inspection basis: Default cutter diameter tolerance -0.020 / 0 mm; default corner-radius tolerance ±0.02 mm. State special tolerances and dimensional-report requirements on the purchase order.
Diamond coating and edge retention
A diamond system engineered for graphite, 10x longer life
D2*10FL*20NL*60 OAL*6SH*2F combines a fine-grain carbide substrate with a graphite-specific diamond coating. On this square end tool, lower edge wear helps retain the specified dimensions and cutting profile during production.
About 74% less edge retreat after 60 minutes
In the shown carbon-resin test, diamond coating records about 0.006 mm edge retreat versus about 0.023 mm for TiAlN. Lower wear supports more consistent machined dimensions.
AK06 fine-grain carbide substrate
AK06 uses high-quality fine WC powder with controlled grain size and morphology, providing a diamond-compatible substrate for D2*10FL*20NL*60 OAL*6SH*2F.
ZOLLER dimensional inspection
Verified dimensions on every end mill
D2*10FL*20NL*60 OAL*6SH*2F
Every tool is checked for critical dimensions and cutting geometry using an optical measurement system. A dimensional report for order code 2GEM 020 200 S06 is available for incoming inspection and traceability.
- Nominal cutter diameter: 2 mm; default tolerance -0.020 / 0 mm
- Dimensional report available
Starting parameters for graphite
Cutting data for D2*10FL*20NL*60 OAL*6SH*2F
Use these values as the initial setup for diamond-coated solid carbide end milling in graphite. Validate by test cut and optimise for machine rigidity, tool overhang, runout, and dust extraction.
Spindle speed
28,000
rev/min
Feed rate
700
mm/min
Axial depth ap
2
mm
Radial width ae
0.2
mm
- Reference diameter
- Ø2 mm
- Flutes
- 2
- Effective length
- —
- Taper angle
- —
- Vc
- 175.9 m/min
- fz
- 0.0125 mm/tooth
Nearby 2GEM standard sizes
Compare dimensions and online prices
D2*10FL*60 OAL*4SH*2F
$12.80Order code: 2GEM 020 100 S04
Ø2 · 2F · OAL 60 mm
D2*10FL*15NL*60 OAL*4SH*2F
$12.80Order code: 2GEM 020 150 S04
Ø2 · 2F · OAL 60 mm
D2*10FL*20NL*60 OAL*4SH*2F
$12.80Order code: 2GEM 020 200 S04
Ø2 · 2F · OAL 60 mm
D2*10FL*25NL*70 OAL*4SH*2F
$13.60Order code: 2GEM 020 250 S04
Ø2 · 2F · OAL 70 mm
D2*10FL*30NL*80 OAL*4SH*2F
$15.60Order code: 2GEM 020 300 S04
Ø2 · 2F · OAL 80 mm
D1.5*10FL*60 OAL*4SH*2F
$12.80Order code: 2GEM 015 100 S04
Ø1.5 · 2F · OAL 60 mm
Request pricing: D2*10FL*20NL*60 OAL*6SH*2F
Send the order quantity, work material, machine setup, and target delivery. We will confirm order pricing, production scheduling, and dimensional-report requirements using the 2026-Sep-14 online reference price as the starting point; order code 2GEM 020 200 S06.
Send RFQ