Secure coating-to-substrate interface
The substrate chemistry and microstructure promote dense diamond nucleation, reducing the risk of premature coating separation in abrasive graphite cutting.
3DBE · Standard order code with online price
D6*R3*16FL*30NL*150 OAL*6SH*3F
3F Diamond Ball Nose · Order code: 3DBE 060 300 150
D6*R3*16FL*30NL*150 OAL*6SH*3F diamond-coated ball nose graphite end mill in the 3DBE series. Online reference price USD 36.40/pc as of 2026-Sep-14; order code 3DBE 060 300 150.
Price available online
$36.40
USD / pc · FOB China
Price as of 2026-Sep-14
Published online for purchasing budgets and size comparison
Standard terms are 100% T/T in advance with a reference lead time of 10–15 working days. Final price and delivery are confirmed against quantity, tolerance, and order requirements.
- Order code
- 3DBE 060 300 150
- Product family
- 3DBE
- Substrate / coating
- Solid carbide / diamond
- Quality documentation
- Dimensional report available
D6*R3*16FL*30NL*150 OAL*6SH*3F engineering specification
Technical dimensions table
Order code: 3DBE 060 300 150
All linear dimensions in mm
| Parameter | Symbol | Value | Purchasing / inspection note |
|---|---|---|---|
| Cutter diameter | D | 6 mm | Nominal cutting diameter; default tolerance -0.020 / 0 mm |
| Ball / corner radius | R | 3 mm | Nominal ball radius; default tolerance ±0.02 mm |
| Flute length | L1 | 16 mm | Cutting edge length |
| Neck diameter | dN | — | Neck diameter not specified for this item |
| Neck length | L2 | 30 mm | Nominal neck length |
| Shank diameter | d | 6 mm | Nominal shank diameter |
| Overall length | L | 150 mm | Overall length (OAL) |
| Flute count | Z | 3 | Number of flutes |
Inspection basis: Default cutter diameter tolerance -0.020 / 0 mm; default corner-radius tolerance ±0.02 mm. State special tolerances and dimensional-report requirements on the purchase order.
Diamond coating and edge retention
A diamond system engineered for graphite, 10x longer life
D6*R3*16FL*30NL*150 OAL*6SH*3F combines a fine-grain carbide substrate with a graphite-specific diamond coating. On this ball nose tool, lower edge wear helps retain the specified dimensions and cutting profile during production.
About 74% less edge retreat after 60 minutes
In the shown carbon-resin test, diamond coating records about 0.006 mm edge retreat versus about 0.023 mm for TiAlN. Lower wear supports more consistent machined dimensions.
AK06 fine-grain carbide substrate
AK06 uses high-quality fine WC powder with controlled grain size and morphology, providing a diamond-compatible substrate for D6*R3*16FL*30NL*150 OAL*6SH*3F.
ZOLLER dimensional inspection
Verified dimensions on every end mill
D6*R3*16FL*30NL*150 OAL*6SH*3F
Every tool is checked for critical dimensions and cutting geometry using an optical measurement system. A dimensional report for order code 3DBE 060 300 150 is available for incoming inspection and traceability.
- Nominal cutter diameter: 6 mm; default tolerance -0.020 / 0 mm
- Nominal radius: 3 mm; default tolerance ±0.02 mm
- Dimensional report available
Starting parameters for graphite
Cutting data for D6*R3*16FL*30NL*150 OAL*6SH*3F
Use these values as the initial setup for diamond-coated solid carbide end milling in graphite. Validate by test cut and optimise for machine rigidity, tool overhang, runout, and dust extraction.
Spindle speed
15,000
rev/min
Feed rate
3,540
mm/min
Axial depth ap
1.2
mm
Radial width ae
1.2
mm
- Reference diameter
- Ø6 mm
- Flutes
- 3
- Effective length
- —
- Taper angle
- —
- Vc
- 282.7 m/min
- fz
- 0.0787 mm/tooth
Nearby 3DBE standard sizes
Compare dimensions and online prices
D6*R3*16FL*50NL*150 OAL*6SH*3F
$40.20Order code: 3DBE 060 500 150
Ø6 · 3F · OAL 150 mm
D6*R3*16FL*50NL*180 OAL*6SH*3F
$45.60Order code: 3DBE 060 500 180
Ø6 · 3F · OAL 180 mm
D6*R3*16FL*25NL*110 OAL*6SH*3F
$29.40Order code: 3DBE 060 250 110
Ø6 · 3F · OAL 110 mm
D6*R3*16FL*40NL*110 OAL*6SH*3F
$30.40Order code: 3DBE 060 400 110
Ø6 · 3F · OAL 110 mm
D5*R2.5*16FL*110 OAL*5SH*3F
$23.60Order code: 3DBE 050 160 110
Ø5 · 3F · OAL 110 mm
D5*R2.5*16FL*40NL*110 OAL*5SH*3F
$26.40Order code: 3DBE 050 400 110
Ø5 · 3F · OAL 110 mm
Request pricing: D6*R3*16FL*30NL*150 OAL*6SH*3F
Send the order quantity, work material, machine setup, and target delivery. We will confirm order pricing, production scheduling, and dimensional-report requirements using the 2026-Sep-14 online reference price as the starting point; order code 3DBE 060 300 150.
Send RFQ