DIN 6537 Standard Sizes · Coolant-Thru Drill Depth Ratio
8D DIN 6537 Carbide Coolant-Thru Drills
These are German DIN 6537 standard-size coolant-through carbide drills. The 8D ratio tackles deep-hole applications where chip evacuation and heat build-up are the primary failure modes. Internal coolant channels maintain cutting temperature and flush chips continuously, enabling consistent hole quality in steel, stainless, and ductile iron at depths where standard drills fail.
For buyers checking Gühring 8D drill price, this page gives a factory-direct DIN 6537 size table, visible reference prices, pilot-hole guidance, coolant requirements, and RFQ data for evaluating a cost-effective alternative.
Applications
Deep holes in steel · Ductile iron components · Stainless manifolds · Oil and coolant galleries
Feed-In Method
Use a pilot hole, enter at low RPM/feed, then switch to full speed after the drill is supported. Avoid dwell in the hole.
Pilot Hole
Recommended. Pilot diameter should match the drill tolerance closely and guide at least 1.5-2D.
Coolant Requirement
Internal coolant at 30-50 bar with clean filtration is strongly recommended for chip evacuation.
8D DIN 6537 SKU Range
Complete 8D DIN 6537 Coolant-Thru Drill Sizes
Deep hole — steel, stainless, ductile iron, oil galleries
| ĐƯỜNG KÍNH CẮT (D1) h7 | CHIỀU DÀI SỢI (L2) | CHÂN DIA (D2) h6 | CHIỀU DÀI TỔNG THỂ (L1) | Price | TRANG MÃ HÀNG | |
|---|---|---|---|---|---|---|
| 3,00 | 0.1181 | 30,00 | 4,00 | 70,00 | 12,06 US$ | Chi tiết |
| 4,00 | 0.1575 | 42,00 | 4,00 | 83,00 | 15,09 US$ | Chi tiết |
| 5,00 | 0.1969 | 50,00 | 6,00 | 90,00 | 24,60 US$ | Chi tiết |
| 6,00 | 0.2362 | 57,00 | 6,00 | 97,00 | 27,11 US$ | Chi tiết |
| 7,00 | 0.2756 | 76,00 | 8,00 | 116,00 | 46,55 US$ | Chi tiết |
| 8,00 | 0.3150 | 76,00 | 8,00 | 116,00 | 46,55 US$ | Chi tiết |
| 9,00 | 0.3543 | 87,00 | 10,00 | 131,00 | 70,56 US$ | Chi tiết |
| 10,00 | 0.3937 | 95,00 | 10,00 | 139,00 | 75,39 US$ | Chi tiết |
| 11,00 | 0.4331 | 106,00 | 12,00 | 163,00 | 117,83 US$ | Chi tiết |
| 12,00 | 0.4724 | 114,00 | 12,00 | 163,00 | 117,83 US$ | Chi tiết |
| 13,00 | 0.5118 | 133,00 | 14,00 | 182,00 | 177,43 US$ | Chi tiết |
| 14,00 | 0.5512 | 133,00 | 14,00 | 182,00 | 177,43 US$ | Chi tiết |
| 15,00 | 0.5906 | 152,00 | 16,00 | 204,00 | 257,96 US$ | Chi tiết |
| 16,00 | 0.6299 | 152,00 | 16,00 | 204,00 | 257,96 US$ | Chi tiết |
| 17,00 | 0.6693 | 171,00 | 18,00 | 223,00 | 354,96 US$ | Chi tiết |
| 18,00 | 0.7087 | 171,00 | 18,00 | 223,00 | 354,96 US$ | Chi tiết |
| 19,00 | 0.7480 | 190,00 | 20,00 | 244,00 | 477,41 US$ | Chi tiết |
| 20,00 | 0.7874 | 190,00 | 20,00 | 244,00 | 477,41 US$ | Chi tiết |
Process Notes
What to Confirm Before Running 8D
Feed-In
Use a pilot hole, enter at low RPM/feed, then switch to full speed after the drill is supported. Avoid dwell in the hole.
Pilot Hole
Recommended. Pilot diameter should match the drill tolerance closely and guide at least 1.5-2D.
Cooling
Internal coolant at 30-50 bar with clean filtration is strongly recommended for chip evacuation.
RFQ Data
Include machine model, toolholder, coolant pressure, material hardness, hole depth, and whether the hole is blind or through.
RFQ Checklist
Quote 8D DIN 6537 coolant-thru drills faster
- Diameter list and quantities
- Work material and hardness
- Hole depth, blind/through condition, tolerance
- Coolant pressure, filtration, machine/toolholder
- Coating preference and annual quantity